UC-3100P Isolated USB to UART Convertor 1Mbps RS-232 RS-485 RS-422 DB9 For Arduino Android Windows Linux Mac OS 3750V All in one

UC-3100P Isolated USB to UART Convertor 1Mbps RS-232 RS-485 RS-422 DB9 For Arduino Android Windows Linux Mac OS 3750V All in one

UC-3100P Isolated USB to UART Convertor 1Mbps RS-232 RS-485 RS-422 DB9 For Arduino Android Windows Linux Mac OS 3750V All in one

  • VendorINHAOS official store
  • Last PriceUS $49.98piece
  • ShippingFree shipping
  • Product Rating5.0(1)






The UC-3100P is an industrial grade bi-directional high speed USB powered isolated USB to UART converter, with the cables you can make it as:
  1. Isolated USB to TTL UART Converter for Arduino pro mini and so on
  2. Isolated USB to RS-232 with both DB9 Male and Female connector
  3. Isolated USB to RS485 / RS422 Converter
Datasheet available on inhaos website. Why you need this:
  • In most case there have big voltage difference between PC and it\'s peripheral equipment\'s ground, it will lead the equipment working not stable even damaged the equipment and the PC , you need to isolation it to make everything safety.
  • The PC\'s switch power supply have big noise, you need to isolation it to prevent the noise entery your device.
  • Most USB to UART convertor have a fixed level (3.3V or 5V) , it\'s may not match to your device\'s request, use this convertor can be provide same level as your device.
  • You need a very small size and weight converter to carry it, he will travel with you anywhere.
  • USB to UART, USB to RS-232 (Female and Male connector), USB to RS-485RS-422, a set of equipment to meet all the needs of engineers commonly used.
  • Rich LED indication, work status at a glance.
  • Very soft wire with a length of 1 meter to meet all work scenarios.
Used parts: 1, CP2102 driver:

2, USBXPRESS® PROGRAMMER’S GUIDE:

3, USB DRIVER CUSTOMIZATION:

4,:

5, CP2102 Datasheet:

6,ADuM1411 datasheet:

7,MAX3232E datasheet:

8,TP8485E datasheet:

9,UC-3100P:

Electrical Characteristics: UC-3100P converter: Power supply : Max 5V 35mA IO Level : TTL-3.3V / 5V BaudRate: 110bps to 1Mbps Vin: 3.3 to 5.5V Isolation: 3750V for 1 minute TTL Cable: IO Level : TTL-3.3V (w/o Vin) Follow the Vin (w/s Vin) BaudRate : 110bps to 1Mbps Arduino support: YES (DTR signal support) RS-232 Cable(F/M ): ESD Protectioon : ±15 kV (HBM) BaudRate : 110bps to 1Mbps DTR signal : YES (Male DB9) NO (Female DB9) RS-485/RS-422 Cable: ESD Protectioon: ±18 kV (HBM) BaudRate : 300bps to 250Kbps Nodes : Up to 256 (1/8 unit load) Environmental: Operation Temperature : 0°C to 55°C
Operating Humidity : 0 to 90% non-condensing Storage Temperature : -20°C to 65°C UC-3100P Cable:

Note:

When using UART TTL cable , thedefault TTL level is 3.3V , if youwant higher TTL level (eg. 5V), you can connect VIN to 5V.

the Max Vin is 5.5V.

UART TTL cable do not supply voltage to target board .

Package List:
  1. UC-3100P USB to UART converter x 1
  2. UART TTL Cable x 1
  3. RS-232 Female Cable x 1
  4. RS-232 Male Cable x 1
  5. RS-485/422 Cable x 1
  6. Transparent box x 1​