1pcs Professional Step-down Power DC-DC CC CV Buck Converter Step-down Power Supply Module 8-40V to 1.25-36V Power Module

1pcs Professional Step-down Power DC-DC CC CV Buck Converter Step-down Power Supply Module 8-40V to 1.25-36V Power Module

CLEARANCE SALE

Save US $0.77


  • VendorBeautiful Exquisite Life Dropshipping Store
  • Volume Retail sales68 piece
  • List PriceUS $4.84piece
  • SaveUS $0.77piece16% off
  • Your PriceUS $4.07piece
  • ShippingFree Shipping
  • Product Rating4.8(68)

1pcs Professional Step-down Power DC-DC CC CV Buck Converter Step-down Power Supply Module 8-40V to 1.25-36V Power Module

Features:
1. Fixed turn lamp current is 0.1 times the current value ( Used to identify whether the battery is fully charged When charging).
2. Made from a dedicated benchmark IC and high-precision current sensing resistor, proving a more stable constant current, (when 20 °c to 100 °c constant current 1A, temperature drift less than 1%). Particularly suitable for LED driver.
3. High output current, the max output current can reach 8A.
4. Four high frequency capacitance, can lower output ripple, enhance the work stabilization.

Specifications:
Module Properties: non-isolated step-down constant current, constant voltage module (CC CV) charging module
Input voltage: DC 8-40V
Output voltage:DC 1.25-36V continuously adjustable
Output Current: 0-8A (when power tube\'s temperature exceeds 65 degrees, please add cooling fan)
Turn lamp current: constant current value * ( 0.1 ) , turn the lamp current and constant value linkage, such as constant current value is 3A, turn the lamp current is set to a constant current is 0.1 times (0.1 * 3A = 0.3A).
Lowest pressure: 1V
Output Power: Maximum power is about 300W
Conversion efficiency: up to about 95%
Operating frequency: 180KHZ
Output ripple: 20M bandwidth
Input 24V Output 12V 5A ripple around 50mV (Excluding noise)
Output short circuit protection : Yes, constant current
Input Reverse Polarity Protection: None
Output prevent backflow: None
Wiring: Terminal
No-load current: Typical 20mA (24V switch 12V)
Load regulation: ± 1% ( constant )
Voltage regulation: ± 1%
Dynamic response speed: 5% 200uS
Potentiometer adjustment direction: clockwise (increase) , counterclockwise (decrease). the potentiometer(CV) closed to the input voltage is used to regulate voltage, the potentiometer(CC) closed to output voltage is used to regulate current (CC)
Operating temperature: Industrial grade (-40 °c to +85 °c) ( please note the actual use of the power tube temperature , high temperature heat strengthened please )
Indicator: dual color indicator, charging indicator light is red, the green light means fully charged ( No load is green )
Size(approx): 65 x 47 x 22mm(L x W x H)

Battery charge
1. Make sure of the battery float voltage and charging current that you need, as well as the input voltage of the module.
2. Adjust the constant voltage potentiometer and adjust the output voltage to about 5V.
3.Use the multimeter in 10A current scale to measure output short-circuit current, and adjust the current potentiometer to make the output current to the expected charging current value.
4. Adjust the constant voltage potentiometer to make the output voltage reaches the float voltage.
5. Connected to the battery, try to charge.
(1,2,3,4 steps to connect the power module input,output no-load does not connect battery.)

LED constant current drive
1. Make sure the operating current and Max operating Voltage of the LED you need to drive.

2. Adjust the constant voltage potentiometer, adjust the output voltage to about 5V.

3. Use the multimeter in 10A current scale to measure output short-circuit current, and adjust the current potentiometer to make sure the output current to the expected LED operating current.

4. Adjust the constant voltage potentiometer to make the output voltage reach the maximum LED operating voltage.

5. Connect LED, test.

(1,2,3,4 steps to connect the power module input, output No-load does not connect LED.)


Package includes:
1 x DC buck converter module 8A (XL4016)

Buyers Show

You should be sure that before you get a 1pcs Professional Step-down Power DC-DC CC CV Buck Converter Step-down Power Supply Module 8-40V to 1.25-36V Power Module you have already seen and browse the detail of the products first. In this manner you could be sure that you are getting the right product which will suit your needs. Since this 1pcs Professional Step-down Power DC-DC CC CV Buck Converter Step-down Power Supply Module 8-40V to 1.25-36V Power Module has top quality it is one of the better sellers in the market now and many people are recommending the product to their friends and family. These days the product is actually affordable for almost everyone and it’s an excellent buy your money can buy. You don’t need cheaper products if it will only sabotage your work and can not give you the kind of quality that you'll require in the merchandise. With the higher price you may be sure that your money will probably be worth spending in this product.